 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MIL-C-24308 D-Subminiature 550-008 EMI/RFI D-Subminiature Split Backshell G-Spring Shield Termination with Strain-Relief J 550 T 008 M 2 F0 B 1 F 02-04 Basic Part No. Cable Entry Style T = Top, S = Side, E = End Basic Part Number T TOP ENTRY Finish Symbol (Page 3) Shell Size (Table I) Inner Support Ring Dash No. (Part No. 469-001 - Table III) Omit for none (Ring Not Shown) Cable Entry Dash No. (Table II) F = Strain Relief, G = Gland Nut 0 = Without EMI Gasket, 1 = With EMI Gasket Jackscrew Type (Page A-4) 1.250 (31.8) Max Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting 1.500 F0 = Front Mounting EMI Gasket (Optional) (38.1) R1-R9 = Rear Mounting Max Cable Range Shell I.D. Style F Strain Relief K E END ENTRY Style G Gland Nut S SIDE ENTRY TABLE III: SUPPORT RING TABLE I: SHELL SIZE & ENTRY STYLE Com'l Entry Style Entry Style Shell Shell T (Ref) E Size Size Ref Shell I.D. Shell I.D. 1 E/09 .250 (6.4) .375 (9.5) 2 A/15 .375 (9.5) .375 (9.5) 3 B/25 .475 (12.1) .475 (12.1) 4 C/37 .475 (12.1) .475 (12.1) 5 D/50 .575 (14.6) .575 (14.6) 6* F/104 1.000 (25.4) n/a * Shell Size 6 Available in Top Entry Only. 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. Dash O.D. I.D. No. (.3) .010 (.3) .010 01 .227 (5.8) .187 (4.7) 02 .258 (6.6) .218 (5.5) 03 .290 (7.4) .250 (6.4) 04 .321 (8.2) .281 (7.1) 05 .352 (8.9) .312 (7.9) 06 .383 (9.7) .343 (8.7) 07 .415 (10.5) .375 (9.5) 08 .446 (11.3) .406 (10.3) 09 .478 (12.1) .438 (11.1) 10 .508 (12.9) .468 (11.9) 11 .540 (13.7) .500 (12.7) 12 .571 (14.5) .531 (13.5) 13 .602 (15.3) .562 (14.3) 14 .633 (16.1) .593 (15.1) 15 .665 (16.9) .625 (15.9) 16 .696 (17.7) .656 (16.7) 17 .727 (18.5) .687 (17.4) 18 .758 (19.3) .718 (18.2) 19 .790 (20.1) .750 (19.1) 20 .821 (20.9) .781 (19.8) 21 .852 (21.6) .812 (20.6) Consult Factory For Larger Sizes Printed in U.S.A. TABLE II: BACKSHELL DIMENSIONS & CABLE ENTRY Dash J Dim No. Max 02 .968 (24.6) 03 1.046 (26.6) 04 1.156 (29.4) 05 1.218 (30.9) 06 1.343 (34.1) 07* 1.468 (37.3) 08* 1.593 (40.5) K Max .781 (19.8) .906 (23.0) 1.031 (26.2) 1.156 (29.4) 1.281 (32.5) 1.406 (35.7) 1.531 (38.9) Cable Range Max Min .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) .437 (11.1) .625 (15.9) .562 (14.3) .750 (19.1) .687 (17.4) .875 (22.2) .812 (20.6) 1.000 (25.4) * Available in Shell Size 6 Only (c) 2004 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-24 D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) Jackscrew Types B, D, E, H, K (Page A-4) F R F E Jackscrew Types B, D, H, K and J Only (Page A-4) Termination Type S - SIDE ENTRY E T - TOP ENTRY Shrink Sleeve (As Required) A D C E - END ENTRY E A G B .12 (3.0) Ref. COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com'l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) .005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS Panel Dash No. Thickness n/a CC n/a F0 .031 (.8) R1 .047 (1.2) R2 .062 (1.6) R3 .093 (2.4) R4 .104 (2.6) R5 .125 (3.2) R6 .156 (4.0) R7 .135 (3.4) R8 .188 (4.8) R9 E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. (c) 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-25 MIL-C-24308 D-Subminiature |
Price & Availability of 550E008M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |